Cement Mixer Hire
Online price from £29.60
- Available nationwide
- 3 model types – 110V, Petrol, Diesel
- Ideal for both DIY and professional applications
Nationwide Cement Mixer Hire
Ideal for both DIY and professional applications, mixing a full wheelbarrow load of concrete or mortar.
Mixing concrete or cement with a mixer is much easier and quicker than conventional methods allowing larger quantities to be produced in a relatively short time. Our cement mixers are built for durability and are the number one choice nationwide. The mixers have full thermal overload protection as well as an NVR (no-volt-return) safety power switch. Used with its stand these highly portable, lightweight, and quality machines allow barrow height mixing and tipping.
- Based On: Belle Minimix 150
- Power (hp / kW): 0.75 / 0.55
- Drum Volume: 130l
- Mix Capacity (litres): 90
- Power (hp / Kw): 0.75 / 0.55
- Drum Speed (rpm): 24
- Noise Level (dB): 107
- Dimensions: Width x Height x Length (mm): 597 x 890 x 1211
- Weight without stand (kg): 55
Concrete And Mortar Mixes
There are several different mixes that can be employed. The proportions of each individual element added are dependent on the project. A strong concrete mix is one with a higher percentage of cement, whilst a weaker mix uses less.
General Purpose Concrete = 1:2:3 mix. Perfect for most uses except foundations and exposed paving. It is composed of one part cement, two parts sand, and three parts coarse aggregate (if using a combined aggregate, this mix would be 1:4, one part cement to four parts combined aggregate).
Foundation Concrete = 1:2 ½:3 ½ mix. The standard for wall foundations or bases and laying paving slabs, etc. One part cement, two and half sand, and three and a half coarse aggregate (if using a combined aggregate, this mix would be 1:5).
Paving Concrete = 1:1 ½:2 ½ mix. Ideal for exposed paving such as driveways and garage floors. One part cement, one and a half parts sand, and two and a half parts coarse aggregate (combined aggregate would need a mix of 1:3 ½).
Standard Mortar = 1:5 mix. For internal or sheltered bricklaying. Mix one part cement to five parts soft sand. Add a small amount of lime or one-part plasticizer to increase the workability (this type of mix is perfect for an internal block partition wall).
Strong Mortar = 1:4 mix. Used for exposed brickwork. Mix one part cement to four parts soft sand, add a small amount of lime or plasticizer to increase the workability.